What is the minimum order quantity for aluminum windows and doors?

Because every unit is made to measure, VELTOR accepts single-project orders as well as container-load dealer orders. The practical minimum is usually defined by shipping economics, so we help buyers consolidate windows and doors into one shipment.

Do you offer thermal break aluminum windows for cold climates?

Yes. Our thermal-break systems use polyamide insulating strips combined with double or triple insulated glass units, Low-E coatings and warm-edge spacers. Final thermal performance depends on the system series and glass build-up chosen for your climate zone.

Can you manufacture to my local building standards?

We engineer each project against the buyer's target standards for wind load, water tightness, air permeability and safety glazing, and provide the related documentation for review before production.

How are windows and doors packed for export?

Frames are protected with film and corner guards, glass units are separated, and finished products are loaded in reinforced wooden crates labeled by opening number to simplify on-site installation.

What is the typical production lead time?

Lead time depends on order size, finish and glass specification. After drawings are confirmed and the deposit is received, we issue a written production schedule so buyers can plan shipping and installation.

CE Certified Aluminium ACP Door Factory & Supplier

Architectural-Grade Aluminium Composite Panel Systems, Thermal Break Doors, and Custom Exterior Solutions Engineered to European Standard EN 14351-1.

Factory Direct Catalog

Featured Commercial & Residential Door Systems

Explore our flagship range of CE-certified aluminium composite panel (ACP) doors, thermal break profiles, and automated fenestration systems tailored for B2B importers and building projects.

Aluminum Glass Fire-Rated Doors - Hospital & Office Safe Compliant

Send an Inquiry

American Replacement Top Hung Sash Window

American Top Hung Sash & Exterior Vertical Sliding Windows

Send an Inquiry

Exterior Conceal Stacking Sliding Patio Door Inside Wall Pocket

Send an Inquiry

NFRC Energy Saving Thermal Break Soundproof Double Hung Window

Send an Inquiry

Simple Modern Aluminum Casement Door Sound Insulated System

Send an Inquiry

DMJ-DK002 Exterior Powder Coated Weatherproof Hinged Entry Door

Send an Inquiry

Luvindow Premium Aluminum Clad Wood Double Tempered Glass Windows

Send an Inquiry

MLX550 Series Fully Automatic Zero Error Intelligent Door Production Line

Send an Inquiry

Industry Whitepaper & Technical Analysis

Engineering Excellence in CE Certified Aluminium ACP Doors

In modern architectural design and international commercial construction, selecting high-performance fenestration systems requires balancing structural durability, thermal efficiency, fire safety, and aesthetic versatility. As a premier CE Certified Aluminium ACP Door Factory & Supplier based in Foshan, Guangdong—China's global capital for architectural aluminum manufacturing—Veltor Window & Door Co., Ltd. delivers engineered door solutions designed to meet rigorous global building standards.

Aluminium Composite Panel (ACP) doors represent a significant breakthrough in bi-metallic composite engineering. By sandwiching a mineral-filled or polyolefin core between two high-strength 6063-T5 or 6063-T6 architectural aluminum alloy skins, ACP door systems achieve unparalleled dimensional stability, lightweight structural rigidity, and superior resistance to environmental degradation. When combined with advanced European-standard thermal break profiles (PA66-GF25 polyamide insulation strips), these systems prevent thermal bridging, lower building operational energy expenditures, and comply fully with European Union Construction Products Regulation (CPR 305/2011) under EN 14351-1.

Information Gain Insight: Unlike standard hollow metal or solid timber doors, high-density Aluminium ACP composite doors engineered with Fluorocarbon (PVDF) surface coatings demonstrate a delta E (ΔE) color variance of less than 1.5 over a 20-year exposure cycle in coastal environments, making them the ultimate standard for commercial entrances, cleanrooms, educational campuses, and luxury residential projects.

EN 14351-1

CE Compliant Standard

Class A2 / B1

Fire-Retardant Core

U ≤ 1.1

W/m²K Thermal Rating

42 dB

Acoustic Reduction

Material & System Specifications

Anatomy of a High-Performance Aluminium ACP Door

Understanding the component hierarchy of certified ACP door systems allows project architects, procurement managers, and facade engineering consultants to make informed decisions that prevent structural deflection, seal failure, and premature surface weathering.

6063-T5 / T6 Profile Extrusions

Utilizing primary aluminum billets with optimal tensile strength (≥205 MPa) and yield strength (≥180 MPa). Profile wall thicknesses strictly adhere to 2.0mm–3.0mm commercial project benchmarks for wind-load resistance (up to 5.0 kPa).

Fire-Rated Composite Cores

Equipped with FR-B1 or non-combustible Class A2 mineral composite cores (magnesium hydroxide / aluminum trihydrate fill). Ensures compliance with global building safety codes and thermal smoke barrier standards.

PVDF Kynar 500 Surface Finish

Triple-bake fluorocarbon coatings with minimum 70% resin concentration. Resists salt spray corrosion (ASTM B117 >3000 hours), UV degradation, chalking, and industrial air pollution.

Performance Parameter	Standard Test Method	Veltor ACP Door Specification	Engineering Benefit
CE Certification	EN 14351-1:2006+A2:2016	Fully Certified (CPR Compliant)	Unrestricted import & installation across European Union member states.
Thermal Transmittance (U-Value)	EN ISO 10077-2 / ASTM C1363	1.0 to 1.4 W/m²K (Thermal Break System)	Significantly reduces HVAC cooling/heating loads; meets Net-Zero building codes.
Acoustic Insulation (Rw)	EN ISO 140-3 / ASTM E90	Rw = 36 dB to 42 dB	Provides internal acoustic privacy for executive offices, hotels, and coastal villas.
Air Permeability	EN 12207 / ASTM E283	Class 4 (Highest Rating)	Eliminates draft infiltration; optimizes indoor air quality (IAQ) and pressurization.
Water Tightness	EN 12208 / ASTM E331	Class 9A (600 Pa)	Prevents water ingress during extreme monsoon storms and wind-driven rain events.
Wind Load Resistance	EN 12210 / ASTM E330	Class C5 (2000 Pa design pressure)	Engineered for high-rise commercial structures and coastal hurricane zones.

Market Outlook 2025–2030

Future Procurement & Technological Trends in ACP Door Systems

The international building envelope sector is undergoing a rapid transition toward decarbonization, digitized pre-fabrication, and smart security integration. Project buyers, developers, and door distributors must realign their procurement strategies to capture these emerging technical shifts:

1. Low-Carbon Aluminum & Circular Sourcing

Global ESG regulations (such as Europe's CBAM) mandate lower embodied carbon in building materials. Modern ACP door manufacturing increasingly relies on hydro-powered secondary aluminum extrusions, cutting carbon intensity from 16 kg CO2/kg Al to below 4.0 kg CO2/kg Al.

2. Smart Building & IoT Hardware Integration

Architectural door specifications now demand factory-milled recessing for motorized multi-point locks, biometric access control, hidden magnetic sensors, and automated entry systems, eliminating on-site modification errors.

3. Automated Zero-Error Production

The introduction of fully automated fabrication setups—such as the MLX550 Series Intelligent Production Line—enforces double-end precision cutting within 0.1mm tolerances, ensuring flawless miter joining, seamless corner crimping, and gasket seal integrity.

Factory Direct Value

Why Partner with Veltor Window & Door Co., Ltd.?

Headquartered in Building 6, Yiqiying Industrial Park, Shishan Town, Nanhai District, Foshan, Veltor operates at the heart of China’s most sophisticated aluminum profile and hardware ecosystem. Our direct factory business model eliminates intermediary markups while providing end-to-end technical oversight for international buyers.

100% Shop Drawing Verification

Before production begins, our engineering team converts your architectural drawings into precise CAD elevation and section details, guaranteeing perfect fit-for-purpose installation.

Integrated CNC Fabrication

Our workshop features high-speed 4-axis CNC machining centers, automated corner crimping, and laser-guided glass positioning for tight tolerance control.

Export-Ready Heavy-Duty Crating

Finished doors are wrapped in anti-scratch protective film, corner-shielded, and packed into IPPC ISPM 15 certified fumigated plywood crates, clearly labeled by grid/opening code.

Buyer Knowledge Base

Frequently Asked Questions (FAQ) for Global Procurement

What makes a door system officially CE Certified under EN 14351-1?

CE marking under EN 14351-1 verifies that the complete door assembly (including frame profile, glass/ACP infill, weather seals, and structural hardware) has passed mandatory Assessment and Verification of Constancy of Performance (AVCP) testing. This includes initial type testing (ITT) for water tightness, air permeability, wind load resistance, operating forces, and dangerous substance emission. Veltor provides official Declaration of Performance (DoP) documentation for all export orders.

How does an Aluminium ACP Door compare to a traditional solid Aluminium Casement Door?

While solid aluminum casement doors rely purely on hollow extruded frames with glass infills, an ACP door incorporates a composite sandwich panel (Aluminum-Core-Aluminum). This design delivers significantly superior acoustic isolation (eliminating hollow metallic echo), higher impact resistance against forced entry, improved thermal U-values, and lower total weight—reducing hinge wear over decades of heavy commercial use.

What is the Minimum Order Quantity (MOQ) and sample policy for B2B buyers?

Because every unit is custom-engineered to project dimensions, Veltor supports both single-villa custom orders and full container-load (FCL) shipments for commercial developers and regional distributors. We provide corner section samples, profile color swatches, and hardware kits for engineering review prior to main contract execution.

Can Veltor manufacture ACP doors to withstand high hurricane wind loads and coastal air exposure?

Yes. For coastal and typhoon-prone zones, we specify heavy-duty 6063-T6 aluminum profiles with 3.0mm wall thickness, multi-point stainless steel (SUS316) lock systems, impact-laminated glass options, and PVDF 70% Kynar 500 fluorocarbon surface coatings tested to withstand up to 3000 hours of continuous salt spray per ASTM B117.

What lead times can importers expect from order confirmation to ocean dispatch?

Standard manufacturing lead times range between 25 to 35 calendar days following final CAD shop drawing sign-off and deposit confirmation. For large-scale multi-family developments, phased container dispatch schedules can be established to align directly with on-site construction milestones.

Ready to Engineer Your Project's Door & Window Solutions?

Contact our experienced Foshan technical export team today for CAD shop drawing reviews, structural calculations, and factory-direct wholesale pricing.

Send an Inquiry