In modern architectural fenestration, the Aluminum Awning Window occupies a vital position due to its unique combination of weatherproofing efficiency, ventilation versatility, and structural strength. Hinged at the top and opening outward from the bottom, awning windows form an overhead umbrella effect. This geometrical advantage allows ambient fresh air to circulate throughout building interiors even during heavy downpours, preventing water ingress where side-hung casement or horizontal sliding windows fail.
For global procurement managers, commercial general contractors, and fenestration importers, selecting the right factory partner requires looking beyond surface aesthetics. Veltor Window & Door Co., Ltd. integrates high-tensile 6063-T5/T6 extrusions, multi-stage polyamide thermal breaks, and heavy-duty 4-bar stainless steel friction stays. Our engineering team provides detailed information gain by evaluating dynamic wind pressures, regional solar heat gain coefficients (SHGC), and structural structural load requirements prior to mass manufacturing.
Engineered for rigorous architectural demands across residential villas, commercial offices, and educational institutions. Explore our primary system series below.
Built with 2.0mm–2.2mm profile wall thickness and multi-point lock gears, optimized for wide curtain wall cutouts, mid-rise commercial blocks, and educational facilities requiring maximum air tightness.
Get CatalogDesigned for luxury residential villas and modern architectural facades. Features narrow sightlines down to 38mm, maximized glass surface area, and hidden friction hinges for sleek visual aesthetics.
Get CatalogSpecially engineered with heavy-gauge 6063-T6 reinforced structural ribs, laminated safety glazing (PVB/SGP interlayers), and high-load friction stays to resist extreme coastal wind pressures.
Get CatalogIntegrates 24V DC electric chain actuators and intelligent wind/rain sensor stations. Seamlessly connects with Building Management Systems (BMS) or smart home protocols for high-level automated ventilation.
Get CatalogCombines an exterior-opening awning sash with an interior high-tensile 304 stainless steel mesh screen. Provides natural airflow alongside intruder protection and insect filtration.
Get CatalogEmploys extra-wide 34mm PA66-GF25 polyamide thermal barriers, triple-pane Low-E insulated glass filled with Argon, and warm-edge spacers to deliver thermal efficiency reaching U ≤ 1.0 W/m²K.
Get CatalogHow market shifts, energy mandates, and smart building integration are transforming wholesale window procurement worldwide.
Global building energy codes (such as Europe's EPBD directive and North America's IECC requirements) demand radical improvements in fenestration thermal metrics. Buyers no longer evaluate non-thermal aluminum frames due to severe condensation risks and structural thermal bridging.
Procurement departments are shifting toward certified low-carbon recycled aluminum billets (smelted using renewable hydropower) integrated with PA66-GF25 thermal breaks. Veltor Window & Door Co., Ltd. offers full traceability for profile billet sourcing, assisting developers in gaining LEED and BREEAM environmental credits.
Modern commercial buildings rely heavily on natural ventilation strategies to cut down on continuous HVAC energy load. Automated aluminum awning windows equipped with concealed 24V motor actuators are rapidly becoming standard in architectural specifications.
These systems interface directly with centralized Building Management Systems (BMS), closing automatically upon detecting precipitation or excessive wind velocity, while modulating opening angles based on internal CO2 levels and indoor air quality sensors.
To reduce expensive job-site labor costs in Europe, North America, and Australia, general contractors are insisting on pre-engineered sub-frame installation systems. Aluminum awning windows manufactured with factory-installed sub-frames, pre-applied flashing membranes, and site-ready anchoring clips allow rapid snap-in assembly.
Veltor Window & Door Co., Ltd. provides 3D BIM models (Revit/IFC) during the shop drawing phase to ensure millimetric fit within prefabricated wall panels.
Urban density growth has escalated demand for soundproof fenestration solutions. Aluminum awning windows inherently provide stronger acoustic sealing than sliding windows due to perimeter compression gaskets.
The trend in B2B procurement centers on specifying asymmetric laminated glass build-ups (e.g., 6mm Low-E + 12Ar + 4mm Glass + 0.76PVB + 4mm Glass) combined with multi-point locking. This configuration achieves Sound Transmission Class (STC) ratings above 42 dB, effectively insulating interior occupants from urban street noise.
From metallurgical advancements to precision hardware engineering—how modern design solves age-old performance challenges.
Utilizing high-purity aluminum alloys subjected to artificial aging (T6 treatment) yields yield strengths exceeding 210 MPa. This provides incredible resistance against frame deformation under sustained gale-force pressure.
Moving away from single-strip thermal breaks, our modern profiles incorporate multi-chamber polyamide struts packed with expanded polyethylene (EPE) insulation foams, preventing convection currents inside frame cavities.
Surface treatments utilize premium AkzoNobel or PPG PVDF fluorocarbon coatings capable of passing 3000-hour salt spray testing (AAMA 2605 standard), eliminating chalking, blistering, and color fade in harsh coastal atmospheres.
Heavy-duty 4-bar and 6-bar friction hinges constructed from non-magnetic SUS304 or SUS316 stainless steel support sash weights up to 120 kg while remaining invisible when the window is latched shut.
Rather than using standard PVC seals, our awning windows employ continuous co-extruded EPDM weatherstripping with vulcanized molded corners, ensuring zero shrinkage or hardening across extreme temperature ranges (-40°C to +120°C).
Internal profile drainage channels feature staggered pressure-equalization weeping slots fitted with anti-backdraft caps. This engineering guarantees water drains out freely under wind speeds exceeding 100 km/h.
Technical baseline criteria used by structural engineers and commercial buyers when ordering custom Aluminum Awning Windows from Veltor Window & Door Co., Ltd.
| System Series | Frame Profile Depth | Thermal Break Strip | Glass Configuration | Acoustic Rating (STC) | Primary B2B Target Application |
|---|---|---|---|---|---|
| Series AW-60 Standard | 60mm Frame | 18mm PA66-GF25 Strip | 5mm + 12Ar + 5mm Tempered | 32 - 35 dB | Residential developments, budget apartment projects, inland urban sites |
| Series AW-75 Thermal Plus | 75mm Frame | 24mm PA66-GF25 Strip | 6mm Low-E + 12Ar + 6mm Tempered | 36 - 39 dB | Luxury villas, high-end residential, energy-strict cold climate zones |
| Series AW-90 Commercial Heavy | 90mm Frame | 34mm PA66-GF25 Multi-cavity | 6mm + 12Ar + 6mm + 12Ar + 6mm Triple | 40 - 44 dB | Commercial office towers, institutional builds, high-wind coastal towers |
| Series AW-Impact 100 | 100mm Frame | Steel-Reinforced PA66 | 6mm + 1.52SGP + 6mm Laminated IGU | 38 - 42 dB | Hurricane/cyclone regions, oceanfront resorts, extreme safety specs |
* Note: All parameters can be customized according to architectural CAD drawings, structural wind load calculations, and energy compliance standards (AS2047, NFRC, CE, CSA).
Our Foshan manufacturing infrastructure provides world-class quality control, factory-direct pricing, and complete engineering transparency.
Located in Nanhai District, Foshan—the world's densest architectural aluminum cluster—giving us direct access to premium billets, PVDF coating lines, and top-tier hardware suppliers.
Double-head automated saws and 5-axis CNC machining centers guarantee corner miter tolerances within 0.1mm and perfect hinge routing on every single sash.
Every batch of aluminum awning windows undergoes air infiltration, water penetration, and corner crimp strength testing inside our factory test lab prior to packing.
Products are wrapped with protective film, edge corner guards, plastic banding, and loaded into fully enclosed, fumigated plywood crates with individual mark IDs.
Send your window schedule or architectural plans directly to [email protected] for a comprehensive factory quotation.
Addressing core technical questions asked by importers, architects, and search queries regarding wholesale procurement.
Aluminum Awning Windows open outward from the bottom, creating a natural protective glass canopy over the wall opening. This geometry permits active interior ventilation during heavy rain storms without water splashing indoors. Furthermore, when latched shut, wind pressure pushes the awning sash against the outer frame gasket, creating a tighter seal than traditional horizontal sliders. Combined with multi-point compression locking and continuous EPDM weatherstripping, awning windows achieve exceptionally high air tightness and water penetration resistance ratings (700+ Pa).
Veltor Window & Door Co., Ltd. uses high-purity 6063-T5 and 6063-T6 architectural aluminum alloy profiles. Profile nominal wall thickness ranges from 1.6mm for standard residential windows up to 2.2mm or thicker for heavy-duty commercial installations and curtain wall inserts. All thermal-break profiles incorporate fiberglass-reinforced polyamide (PA66-GF25) insulating strips to eliminate thermal bridging between interior and exterior aluminum chambers.
Wind load engineering depends on matching glass thickness, sash geometry, profile inertia (I-values), and hardware load ratings. We utilize heavy-duty stainless steel 304 or 316 4-bar friction stays rated up to 120 kg per sash and multi-point locking gear driven by heavy-duty winders or electric chain actuators. Our systems undergo rigorous physical air-water-structural chamber testing, passing structural wind load pressures up to 4500 Pa (equivalent to Category 5 hurricanes).
For cold regions requiring low U-factors, our thermal break aluminum awning windows accommodate double (24mm to 28mm) or triple (36mm to 42mm) insulated glass units (IGU). We utilize double soft-coat Low-E coatings, warm-edge composite glass spacers, and 90% Argon gas filling. This glass configuration paired with our multi-chamber PA66-GF25 thermal profile achieves system U-factors down to 1.2 W/m²K (0.21 BTU/hr·ft²·°F).
Yes! Because aluminum awning windows swing outward, insect screens or security mesh are installed on the interior side of the frame. We offer fixed interior screens, winder-compatible retractable screens, and hinged 304 high-tensile stainless steel security screens. Interior winders allow smooth opening and closing of the awning sash without opening or removing the screen.
Standard factory production lead time is 25 to 35 calendar days following CAD shop drawing confirmation, color sample approval, and deposit receipt. Finish options like fluorocarbon PVDF coating or custom anodizing may add 5 days. Products are packed into customized, fumigated wooden crates labeled per elevation ID to ensure rapid unpacking on site.
We assist importers, contractors, and project developers by supplying comprehensive technical documentation, raw material test certificates (ISO 9001, aluminum tensile strength, glass SGCC/IGCC certificates), and compliance documentation for North American (NFRC/AAMA), European (CE / EN 14351-1), and Australian (AS2047) standards. Contact [email protected] for specialized compliance submittals.
Provide your project drawings, opening schedule, or distribution target. Our technical engineering desk will respond with system proposals, CAD details, and factory pricing within 24 business hours.
Get CatalogVeltor Window & Door Co., Ltd.
Building 6, Yiqiying Industrial Park, No. 3 Qiangshi Road, Shishan Town, Nanhai District, Foshan, Guangdong 528225, China